Part 1: THT Assembly PCB assembly for through-hole technology is different than the Surface mount technology as THD Can not be mounted on top of the PCB so there are two procedures to follow for THT assembly. One of them is the traditional Manual method and second one is automatic method. Some steps are discussed here in detail. Step1: Component’s placement Themanual methodof components placement ...

If you have the opportunity to pick up a printed circuit board and observe it alittle, you willfind that there are many large and small holes on the circuit board. Take it up and look at the lamp on the ceiling, and you will find many densely packed small holes. The holes are not placed in a good place, each hole is designed with a purpose. Commonly drilled holes in our printed circuit board(PCB) ...

Aluminum PCB has the ability to dissipate heat from electronics, it has a standard FR4 laminate and an aluminum core. The circuit board effectively helps dissipate heat with its unique thermal insulation layer. These printed circuit boards are most widely used in applications involving tight tole rances and high power. Choosing the type of aluminum circuit board depends largely on its use. A lumin...

A Thick Copper PCB, also known as a Heavy Copper PCB, is a type of printed circuit board that features copper traces and planes with significantly higher copper thickness compared to standard PCBs. While standard PCBs typically have copper thickness measured in ounces (e.g., 1 oz, 2 oz), Thick Copper PCBs can have copper thicknesses ranging from 3 oz to as high as 20 oz or more. The increased copp...